Suspension, Appearance, And Results
Our project Fit has come a long way. In the beginning, we could barely scrounge up a set of coilovers since no one was jumping in to make new parts for the '09 GE. In fact, when the car was handed over to me, it had nothing more than a set of coilovers, HKS axle back muffler, and set of Gram Lights. A great beginning, but there wasn't very much aftermarket support for the '09 GE. Being the internet nerd that I am, I searched high and low, looking for anything to add to the list of upgrades. Eventually I ran across a cold-air intake from Takeda for a little more power, and some beautiful carbon fiber pieces from JDP Engineering. It's been a long hunt, but I've managed to dig up a few more items to bolt on.Honda Factory Performance And Mugen
One cool thing about the '09 Fit is that it has some optional equipment available through HFP. I'm not just talking about gold license plate frames, dash mats, and key chains at your local dealer. No, I'm referring to genuine Mugen parts. That's right, from a Mugen oil cap, to a full body kit; you can order a number of items. We were lucky enough to get our hands on a Mugen grill, floor mats, and oil cap. By far, the front grill makes the biggest impact. It comes pre-painted to match your Fit's exterior, includes the infamous Mugen badge, and features a border that really changes the look of the front end. It installs in less than ten minutes, and you can do it on your own. Check it out...Stiff Stuff From Ultra Racing
I searched every corner of the web in search up suspension stiffening upgrades with no luck at all. I remembered seeing a catalog from Ultra Racing, and it seemed like they made a set of bars for every car in existence. After contacting them, it turns out that many of the bars they made for the '08 Jazz would work with the '09 U.S. Fit. The Ultra Racing crew shipped me a pile of bars to install on our project car. I got the car on a lift, and this is what I ended up with...
 The Original Fit Grill Fitted...  The Original Fit Grill Fitted With A JDM CTR Emblem
The Mugen grill as compared to the OEM version. Check out the thick border that runs along the bottom of the grill, and the smooth center that replaces the honeycomb plastic. |  Snap clips hold the factory...  Snap clips hold the factory unit in. Pop them out carefully, one by one, and simply pull the old grill out. The Mugen version uses supplied double sided tape to help center it, along with the factory clips that you should have saved from the OEM grill removal. Just center it, stick, and snap in the clips. |  The Mugen Grill installed...  The Mugen Grill installed with The old CTR emblem. The JDP Engineering radiator shroud and front lip go perfectly with the new addition. |
The additional rigidity could be felt in the Fit as soon as I pulled out of the garage. The chassis felt much more solid and the little GE had no problems being pushed harder than ever through the local back roads. With a bucket seat and a much lower seating position, this could car would be a blast on a short road course. The tighter the turns, the better it will perform.
Paying A Visit To The Godfather
When I attended the Kraftwerks Honda Fit dyno day a few months ago, I heard Oscar Jackson talking about a breakthrough that he'd come across with the Fit motor. Apparently Honda chose a spark plug that protrudes into the head enough to create a power-robbing hot spot. Oscar had tracked down a much better option for the older model Fit, and initial testing on a boosted version produced eight horsepower. I asked O.J. if we might see any increase in power with a naturally aspirated '09 model. His answer, "there's only one way to find out." This would be a perfect opportunity to test our cold air intake, as well as Oscar's theory.