Install: Extended Wheel Studs - Studly Wrenchin'
|
A wheel's backing surface is what holds the rotor to its hub assembly, but these two small screws will still need to be removed before the rotor can come off. The NSX's rear assembly actually looks more like a Civic's front. That's because the NSX uses a transverse-mounted drivetrain-it looks more like a front-wheel-drive engine and trans stuffed in the trunk than a typical rear-wheel-drive configuration would. No matter what you're swapping studs on, the axle nut (front or rear, depending on the application) will need to be removed to get the hub assembly off. Use a punch or screwdriver to bend the set tab out of the way and find the biggest impact gun or breaker bar that you can to bust it off. View Related Article
|
|
Honda CRV Research
Finding a fuel efficient automobile today is easier than ever. Check out the Honda CRV buyer's guide providing information on car specs, reviews and fuel economy. The 2010 CRV is equipped with a L4 engine, generating 180 horsepower, and it has comparable seating capacity. You may also be interested in the Honda Element and the Acura RL.
|
|