Honda Clutch Line Installation - Steel Braided Bling
|
The OEM rigid line travels from the clutch master cylinder to the slave cylinder, located on the transmission. The line is intercepted by a short section of high-pressure rubber hose to allow for engine movement. Use a 10mm line wrench to remove the fitting from the clutch slave cylinder and then a 10mm socket to remove the two bolts holding the bracket in place. Set a drain pan underneath the vehicle to catch the residual fluid from the line and allow it to drain thoroughly before moving forward. View Related Article
|
|
Honda CRV Research
Finding a fuel efficient automobile today is easier than ever. Check out the Honda CRV buyer's guide providing information on car specs, reviews and fuel economy. The 2010 CRV is equipped with a L4 engine, generating 180 horsepower, and it has comparable seating capacity. You may also be interested in the Honda Element and the Acura RL.
|
|