Honda Tuning Magazine Forums

Honda Tuning Magazine Forumshttp://forums.hondatuningmagazine.comJoin the Acura & Honda Tuner Forum at Honda Tuning Magazine to discuss your tuner car, modifications, the latest tuning products, problems, shows & events, girls, and more.http://forums.hondatuningmagazine.com/70/7947377/acura-integra/wat-type-of-oil-should-i-use-in-my-gsr/index.htmlThu, 19 Nov 2009 00:11:55 -0800wat type of oil should i use in my gsr..
im not sure if full synthetic is the best oil for my engyne...

]]><![CDATA[wat type of oil should i use in my gsr..]]>http://forums.hondatuningmagazine.com/70/7947377/acura-integra/wat-type-of-oil-should-i-use-in-my-gsrhttp://forums.hondatuningmagazine.com/70/7915519/1992-2005-civic/92-95-civic-antena/index.htmlWed, 18 Nov 2009 19:11:30 -080092-95 CIVIC ANTENA?
HOW DO I TAKE OUT MY OLD ANTENA AND REPLACE IT W/ A NEW ONE ALL STOCK?

]]><![CDATA[92-95 CIVIC ANTENA?]]>http://forums.hondatuningmagazine.com/70/7915519/1992-2005-civic/92-95-civic-antenahttp://forums.hondatuningmagazine.com/70/7992150/acura-integra/coilover-help/index.htmlWed, 18 Nov 2009 06:11:47 -0800coilover help!
Start with 1 corner and lower it to desired spec, then measuer it with a ruler. Then just go around to each corner and lower it little by little til you get it to the hight you want.

]]><![CDATA[coilover help!]]>http://forums.hondatuningmagazine.com/70/7992150/acura-integra/coilover-helphttp://forums.hondatuningmagazine.com/70/7988412/open-forum/which-one-is-better-nitto-or-bfg/index.htmlMon, 16 Nov 2009 10:11:18 -0800which one is better Nitto or BFG?
Hey I was wondering for next yr I want to get some Drag Radials for my EF hatch. Which is better & which size is better to get 14's or 15's. I could've had better 1/4 mile times for the Detroit vs import.

]]><![CDATA[which one is better Nitto or BFG?]]>http://forums.hondatuningmagazine.com/70/7988412/open-forum/which-one-is-better-nitto-or-bfghttp://forums.hondatuningmagazine.com/70/7988334/open-forum/how-much-do-you-pay-to-have-your-oil-changed/index.htmlMon, 16 Nov 2009 10:11:34 -0800How much do you pay to have your oil changed?
I change my own oil, its easy and alot cheaper. If your dont want to, i would take it to the dealer. DO NOT take it to jiffy lube or one of those kind of places, they do some horrible work and sometimes it'll cause damage to the motor

]]><![CDATA[How much do you pay to have your oil changed?]]>http://forums.hondatuningmagazine.com/70/7988334/open-forum/how-much-do-you-pay-to-have-your-oil-changedhttp://forums.hondatuningmagazine.com/70/7988106/honda-prelude/h23a-help-please-need-please-read/index.htmlMon, 16 Nov 2009 06:11:30 -0800h23a help please need please read
i got a 96 prelude h23a but the motor mess up now i put a95 h23a in it now it dont start i use back the 96 wires one the 96 there a crackshaft on the block but on the 95 it is in the DISTRIBUTOR and i cant put the crackshaft on the 95 block there no place to put it some 1 help me please i have to use the 96 wires because of the map sensor so is there anything i can do to by pass the crackshaft sensor

]]><![CDATA[h23a help please need please read]]>http://forums.hondatuningmagazine.com/70/7988106/honda-prelude/h23a-help-please-need-please-readhttp://forums.hondatuningmagazine.com/70/7944101/1992-2005-civic/94-delsol-si-rwd/index.htmlMon, 16 Nov 2009 02:11:19 -080094 Delsol SI rwd?
I'm thinking about trying this on my on but i want to know if there is any thing i need to know about the f20c? i want to put a f20c, trans, and rear end in a delsol Si. need help, I know it will be expensive!!

]]><![CDATA[94 Delsol SI rwd?]]>http://forums.hondatuningmagazine.com/70/7944101/1992-2005-civic/94-delsol-si-rwdhttp://forums.hondatuningmagazine.com/70/7911175/acura-integra/any-tricks-that-i-can-do-to-my-b18b-engine/index.htmlMon, 16 Nov 2009 01:11:37 -0800any tricks that i can do to my b18b engine
hey im new to this site im looking for info on any tricks to do to my b18b it self,not looking for some one to tell me to buy a turbo/nitrous kit that i know. thanks for your time people ill really apreciate any info you guys can give me

]]><![CDATA[any tricks that i can do to my b18b engine]]>http://forums.hondatuningmagazine.com/70/7911175/acura-integra/any-tricks-that-i-can-do-to-my-b18b-enginehttp://forums.hondatuningmagazine.com/70/7985520/engine-swaps/1994-honda-accord-ex-stock-or-swap/index.htmlFri, 13 Nov 2009 20:11:29 -08001994 honda accord ex stock or swap??
i have a c27 engine v6 engine that i got for free from a 1995 honda accord v6 is it worth putting in my car or just keep the stock?? thanks for the help

]]><![CDATA[1994 honda accord ex stock or swap??]]>http://forums.hondatuningmagazine.com/70/7985520/engine-swaps/1994-honda-accord-ex-stock-or-swaphttp://forums.hondatuningmagazine.com/70/7940357/hondatuningmagazinecom/1990-honda-accord/index.htmlThu, 12 Nov 2009 21:11:03 -08001990 HONDA ACCORD
I have a 1990 honda accord. I want to put a v-6 in it out of a 1999 Acura cl. How do I find a swap kit for this?

]]><![CDATA[1990 HONDA ACCORD]]>http://forums.hondatuningmagazine.com/70/7940357/hondatuningmagazinecom/1990-honda-accordhttp://forums.hondatuningmagazine.com/70/7905601/1992-2005-civic/jdm-as-civic-93-hatch/index.htmlThu, 12 Nov 2009 03:11:47 -0800JDM as *** Civic 93 Hatch.
Looks good, you did a good job with it. What motor is in it? Oh and EG's arent for girls! ;)

]]><![CDATA[JDM as *** Civic 93 Hatch.]]>http://forums.hondatuningmagazine.com/70/7905601/1992-2005-civic/jdm-as-civic-93-hatchhttp://forums.hondatuningmagazine.com/70/7938614/acura-integra/1992-rhd-da/index.htmlWed, 11 Nov 2009 04:11:51 -08001992 rhd da
Can every1 take a look at my rhd da under reader rides.if u have time can u rate my car or leave a comment about my da. Thanks

]]><![CDATA[1992 rhd da]]>http://forums.hondatuningmagazine.com/70/7938614/acura-integra/1992-rhd-dahttp://forums.hondatuningmagazine.com/70/7937504/import-car-models/import-models-from-spocom/index.htmlTue, 10 Nov 2009 07:11:57 -0800Import Models from SpoCom!
This forum has been dead for a few months. Here's a few pics of import models from SpoCom earlier this year that was held in Long Beach, CA. Guess the import model names! Not that hard seeing that these are some of the top models in the import tuner car show circuit. http://farm4.static.flickr.com/3628/3642671095_c1de1a32a8.jpghttp://farm3.static.flickr.com/2451/3634103517_1eff987f6c.jpghttp://farm3.static.flickr.com/2421/3634097919_c9217d14c2.jpghttp://farm4.static.flickr.com/3385/3634912550_29fa25fd94.jpghttp://farm4.static.flickr.com/3552/3634910534_7c1624b5ea.jpghttp://farm4.static.flickr.com/3365/3634916064_082153902c.jpg More car show photos at http://www.autoshowevents.com

]]><![CDATA[Import Models from SpoCom!]]>http://forums.hondatuningmagazine.com/70/7937504/import-car-models/import-models-from-spocomhttp://forums.hondatuningmagazine.com/70/7936640/hondatuningmagazinecom/honda-moped/index.htmlMon, 09 Nov 2009 18:11:58 -0800Honda Moped...
So, I stumbled upon this link in the hondatuningmagazine.com site: http://www.hondatuningmagazine.com/features/htup_0910_1978_honda_express/index.html I was REALLY impressed at the work done on that Honda Express Moped / Scooter. I just got a second-hand honda moped and am very interested in restoring it. It has some problems with the honda express moped carburetor and air filter but I found that site that has some links for honda express parts and manual. So, there's my 2 cents. Thanks for this magazine website and look forward to any articles about that guy upgrading the 49cc engine to a 70cc on the moped. http://hondaexpress.blogspot.com/2009/10/1977-1978-1979-honda-express-nc-50.html Thanks!

]]><![CDATA[Honda Moped...]]>http://forums.hondatuningmagazine.com/70/7936640/hondatuningmagazinecom/honda-mopedhttp://forums.hondatuningmagazine.com/70/7900225/1992-2005-civic/2003-honda-civic-lx/index.htmlMon, 09 Nov 2009 14:11:36 -08002003 honda civic lx
thanks man. i also heard the k24 was to big? i think im going with the k20a2 though. do you know where i can get good reliable parts, that arent too used up or even brand new?

]]><![CDATA[2003 honda civic lx]]>http://forums.hondatuningmagazine.com/70/7900225/1992-2005-civic/2003-honda-civic-lxhttp://forums.hondatuningmagazine.com/70/7973736/1992-2005-civic/2001-honda-civic-tranny-swap/index.htmlFri, 06 Nov 2009 08:11:29 -08002001 honda civic tranny swap
i have a 2001 honda civic ex but its an auto. i've done alot of motor work and now i just want to put a 5sp in it. if u could tell me what all i will need (like ecu axles... will i need to change any of that????) or price that would be great. thanks.

]]><![CDATA[2001 honda civic tranny swap]]>http://forums.hondatuningmagazine.com/70/7973736/1992-2005-civic/2001-honda-civic-tranny-swaphttp://forums.hondatuningmagazine.com/70/7932404/honda-classifieds/fs-h-r-sports-springs-for-02-05-civic-si-ep3/index.htmlFri, 06 Nov 2009 05:11:30 -0800FS: H&R Sports Springs For 02-05 Civic SI EP3
BUMP IF VIEWED THX PM OR EMAIL ME @ MARK_HOU@YAHOO.COM IF INTERESTED Ok, i have BRAND NEW H&R SPORTS SPRINGS FOR 2002-2005 CIVIC SI EP3. THESE SPRINGS WILL LOWER YOUR CAR 2" FRONT & REAR. The most popular spring kit in H&R's line-up, Sport Springs will lower your vehicle an average of 1.5 - 2 inches (depending upon the make and model of your vehicle) for a lower center of gravity, improved handling and a more aggressive appearance. Sport springs feature more control than that of the OE Sport spring, but is still comfortable for daily use. Sport springs are an excellent choice for street and occasional track use. $130 FIRM PICK UP, THIS COST ME $210 SO DONT YEA http://i787.photobucket.com/albums/yy157/tooNz213/me118.jpg http://i787.photobucket.com/albums/yy157/tooNz213/me117.jpg http://i787.photobucket.com/albums/yy157/tooNz213/me119.jpg

]]><![CDATA[FS: H&R Sports Springs For 02-05 Civic SI EP3]]>http://forums.hondatuningmagazine.com/70/7932404/honda-classifieds/fs-h-r-sports-springs-for-02-05-civic-si-ep3http://forums.hondatuningmagazine.com/70/7894651/acura-tsx/acura-zdx-thoughts/index.htmlThu, 05 Nov 2009 17:11:55 -0800Acura ZDX.. Thoughts?
I personally think it's a b|tchin car, even though I'm a pretty big hater of all things crossoverish. Scope the pics: http://www.acura.com/FutureVehicles.aspx and Acura ZDX Apparently it's coming out this december.

]]><![CDATA[Acura ZDX.. Thoughts?]]>http://forums.hondatuningmagazine.com/70/7894651/acura-tsx/acura-zdx-thoughtshttp://forums.hondatuningmagazine.com/70/7929257/open-forum/ap1-s2000-internals/index.htmlWed, 04 Nov 2009 22:11:18 -0800ap1 s2000 internals
hey im 18 and i just got a 2000 ap1 s2000. i havent been doing the whole tuning thing for along time so im still learning. and i have a few questions. i want to run forced induction through a turbo and build the internals so i can run lower than stock compression. i know the stock internals can handle around 400wph however i want to build the internals still so i can run high psi boost if i feel like it every once in a while safley. the f20c in the s2000 has frm line cylinders. i keep hearing that if you put in aftermarket pistons in the f20c without sleeving the cyclinders it will damage the cyclinder walls. however i just read that mahle makes pistons that can go right in. is it a certain coating? what do you have to do to make certain aftermarket pistons work with the f20c's frm cylinders. the pistons i want a cp's low compression 9:1 compression pistons. they are forged and i want to know if i have to sleeve my cylinders first before running them.

]]><![CDATA[ap1 s2000 internals]]>http://forums.hondatuningmagazine.com/70/7929257/open-forum/ap1-s2000-internalshttp://forums.hondatuningmagazine.com/70/7926437/ignition-the-beginners-lounge/i-r-newb/index.htmlTue, 03 Nov 2009 11:11:58 -0800I R NEWB
Hi everyone.Im Erik. This seems like the best Honda related forum I've seen so far so I thought...why not join. I reside in South Africa and the "in-thing" here are hot hatches.I already have most of my financing together and cant wait to take delivery of my...wait for it...hot hatch.As my budget only allows me to a certain limit,at this stage the new Honda Civic Type R Champoinship addition is the best buy as an allround package,which suites me just fine as Im very fond of their sports hatches. Just one problem though...I live on the high reef (Johannesburg)which is 1600 metres above sea level or 1 mile as you may know it.So the air up here is much "thinner" which means the oxygen particles are spread futher apart as for example at the coast and due to that fact vehicles that are not forced inducted (non-turbo or supercharged) tend to lose power,10 to 14 percent loss in power (kw / hp)So this means the 200hp(not sure how much it produces in other countries) mark on the Honda just isnt enough to compare to turbo hatches where Im from which means...modding it.I like modding! So the first words that pop into my head are Mugen and Spoon,unfortunately we have no service centres or outlets of the last two mentioned companies which means I have to import the parts and see if a Honda dealer here can fit it for me.Im not to worried about warranties voiding as I remember the old V-Tec engines being bullet proof.Any suggestions would be welcome to modding the Type R. Regards.

]]><![CDATA[I R NEWB]]>http://forums.hondatuningmagazine.com/70/7926437/ignition-the-beginners-lounge/i-r-newbhttp://forums.hondatuningmagazine.com/70/7923413/honda-pictures/engen-upgrade/index.htmlSun, 01 Nov 2009 12:11:04 -0800Engen upgrade
What kind of effect take place when changing 1.5 manifold and replace it with 1.6i manifold.

]]><![CDATA[Engen upgrade]]>http://forums.hondatuningmagazine.com/70/7923413/honda-pictures/engen-upgradehttp://forums.hondatuningmagazine.com/70/7963677/honda-accord/spark-plugs/index.htmlSun, 01 Nov 2009 06:11:31 -0800Spark Plugs
I just bought some Autolite triple Platinum spark plugs, the application guide book at Autozone recommended them but I haven't installed them yet. The owners manual and some friends said either use NGK or NippoDenso ONLY. Does it matter that much?

]]><![CDATA[Spark Plugs]]>http://forums.hondatuningmagazine.com/70/7963677/honda-accord/spark-plugshttp://forums.hondatuningmagazine.com/70/7885243/accord-tech/interchangeable-parts-93-civic-95-accord/index.htmlSat, 31 Oct 2009 22:10:28 -0700Interchangeable parts 93 Civic & 95 Accord?
I own a 95 Accord EX Vtec 5 speed, I'm also buying a 93 Civic 4 door. Can I use any of the exhaust parts, the (VSS) Speed sensor, Alternator, etc..???? Does anyone know where I can find out which engine parts are interchangeable? Any help is really appreciated Thanks, Greasermac

]]><![CDATA[Interchangeable parts 93 Civic & 95 Accord?]]>http://forums.hondatuningmagazine.com/70/7885243/accord-tech/interchangeable-parts-93-civic-95-accordhttp://forums.hondatuningmagazine.com/70/7922933/honda-accord/95-accord-exhaust/index.htmlSat, 31 Oct 2009 22:10:01 -070095 Accord Exhaust -
I just got a 95 Accord EX and it has no exhaust. It has the exhaust manifold and 1 pipe that drops down below the engine and makes a 90 degree turn, goes about 4 inches and stops. Of course it sounds like a monster truck and my check engine lights are on b/c the O2 sensors aren't connected. Does anyone know if I can rob parts from a 93 Civic? Or does anyone have a system for sale? Also, I looked at an aftermarket catalytic converter but it didn't have any O2 ports. Where exactly are the sensors located. I think there are 2? I can run a cat back system if the sensor ports are b4 all that. Please help, I can't keep driving without an exhaust!!!

]]><![CDATA[95 Accord Exhaust -]]>http://forums.hondatuningmagazine.com/70/7922933/honda-accord/95-accord-exhausthttp://forums.hondatuningmagazine.com/70/7921670/1992-2005-civic/perfect-replace-ment-engine-that-wud-fit-into-a-1993-honda-civic-lxi/index.htmlSat, 31 Oct 2009 02:10:46 -0700perfect replace ment engine that wud fit into a 1993 honda civic lxi
i have a 93 lxi sedan 1600 16v and i want to replace it with a performance engine in it, obviously vtec, but what size can fit with out modifying the engine bay? whats the cost for the engine? and a performance ecu? can any1 help me with this or know of a website that is extremely helpful? so far all iv done is the suspension iv fit D2 adjustables

]]><![CDATA[perfect replace ment engine that wud fit into a 1993 honda civic lxi]]>http://forums.hondatuningmagazine.com/70/7921670/1992-2005-civic/perfect-replace-ment-engine-that-wud-fit-into-a-1993-honda-civic-lxi