Ad Radar
Newsletter

2001 Acura CL Type-S - CL Smooth

Conservative...in a 3/4 chassis, turbo V-6, RWD-converted drag car

By Rodrez, Photography by Quickworks Photography

When you think of Acura's luxurious CL model, you probably can't imagine it embarrassing domestic muscle on the street. Even further from your vision of that V-6-powered, low-slung coupe is a rear-wheel-drive-converted, fully built turbo beast complete with 3/4 chassis and wheelie bars. Fortunately, there's no need to spend time conjuring up that fantasy, Thomas Richardson, owner of this 2001 Type-S, has already taken care of the visuals for you.

When we first laid eyes on the CL, it was positioned on the red carpet during Wek'Fest SF a few years ago. A closer look revealed some topnotch fab work, an amazing airbrush flame effect, and what most people would refer to as a "money pit." The wet look of the freshly painted black finish drew showgoers in, and the flat-black components under the hood baffled those looking for the requisite cold-air intake and reservoir sock covers that you'd come to expect from a car show. Furthermore, most had no idea what kind of car they were drooling over. At the end of the day, the sleek, one-off Acura took home Best Engineered and Best of Show accolades. Commendable, especially for a purpose-built race car, but ever since that day, we've kept tabs on the owner and his project in the hopes that we could finally capture the story. Well, here it is...

Richardson's automotive resume doesn't consist of a long list of Honda builds, and in fact, it's quite the opposite. Immersed in the domestic landscape for years, he's had his share of American muscle but grew bored of that scene. He explains, "My introduction to Sport Compact began at WPB Raceway when the NHRA Xplode series was in its heyday. I loved the Modified and ProRWD class, and upon watching the headliners stand toe-to-toe, I was hooked. I found it remarkable that small engines were putting out such high horsepower." So what sparked the idea of using an Acura CL chassis? Well, part of that came from Richardson's street sleeper, a '03 CL with a custom GT35 strapped to the factory J-series powerplant, and an affinity for pushing around domestic cars on the street. He adds, "I would pull along beside Vettes and the Mustang egomaniacs and tempt them. I only lost a few, and the ones I lost were not by much. Many I shut down with that car and people had no idea what it was. It was debadged with no markings other than one Acura emblem. I just thought it would be different to make a Modified car with the CL. The undertaking was expensive , unknown, and intimidating."

Rather than using his streetcar as the guinea pig, Richardson purchased a salvaged title '01 Type-S on eBay and went right to work stripping it down to a bare chassis. Selling the stock, unnecessary parts paid for the cars purchase price, and then some. Of course, the profit made from selling off extra parts was but a drop in the bucket in the grand scheme of things, especially when you consider the sheer number of man-hours dedicated to the custom fabrication.

The original J32 block was reworked, first with AEBS sleeves and then filled with CP pistons and MGP aluminum rods. The cylinder heads have been ported and flowed with a valve-size increase of 1 mm and a Euro cam upgrade backed by custom VTEC eliminator rockers and custom valvesprings and retainers that round out the top end. Heavy boost is provided by a Precision custom 4508r that shoves air through an Accufab 95mm throttle body and one-off manifold, while Tial products and an AMS 1000 oversee boost regulation.

While Richardson was hesitant about the engines ability in the beginning, he assures us that the J-series is making the necessary power, though he admits his ultra-conservative approach may have held back progression. He states, "I decided to build it with an automatic Powerglide. After all was put together and basically wasting a motor on the dyno, I made it down the track. The results were poor and my experience level and conservative approach just slowed me down. Chalk it up to lessons learned." Though Richardson sounds like his own worst critic, his personal best in the CL is an 8.03, a very respectable number for a vehicle that is based solely on trial and error, with no real history to learn from. After multiple gear changes and torque converter adjustments, the car seemed to run out of engine well before the end of the 1320. "After a year and a half of virtually spinning my tires and seeing an 18 percent loss in the drivetrain, I went for it and embarked on the Liberty five-speed install. What a chore that was." After countless micro-adjustments and plenty of patience, Richardson made his way down the track successfully. The learning curve involved with the Liberty unit is daunting, but a task that Richardson has dedicated himself to, and he notes that he's gained some serious insight on starting line procedure and clutches.

As this article is being written, the CL's engine is being freshened up for a new season of testing and if all goes right, competition. The previous management system, when paired with the Liberty transmission, wasn't up to the task at hand, so it was removed in order for James Lin Motorsports to install the new Motec system. When asked about the ultimate goals for the car, Richardson states, "My plans are to spend the rest of the year on the new management system and get some valuable seat time. I have plans later this year to set the car up for NHRA CCAT Comp Eliminator. To do so involves changing the turbo to two 58s and remaking the front end." So much for the conservative approach...

Bolts & Washers

Propulsion
J32A2
Motec engine management
AEBS sleeves
CP pistons 9.3:1
MGP aluminum rods
ERL machine work/assembly
OEM Euro cam
VTEC eliminator rockers
Custom valvesprings/retainers
Precision custom 4508r turbo
Custom intake manifold
Tial blow-off valve
Tial V60 wastegate
Custom 4-inch downpipe
AMS 1000 boost controller
MSD plug wires
MSD coils
MW Pro Drag 6 ignition box
Waterman fuel pump
Weldon fuel filter
Injector Dynamics injectors
Custom fuel rail
Peterson 4 stage dry-sump
Starlite hoses
Aeromotive regulator
Liberty Extreme 5sp
Titan Engineering Black Star triple disk
Titan Engineering flywheel
Browell bellhousing
Strange Engineering 9-inch differential
Mark Williams driveshaft
Strange Engineering axles

Suspension
Strange Engineering coilovers
Custom four-link suspension
Custom 3/4 chassis

Resistance
Strange Engineering four wheel disc brakes

Wheels And Tires
Rear: American Racing Tracstar Lite
Mickey Thompson slicks 33x10.5x15w
Front: Torque Plus Pro
Mickey Thompson tire 25x5x15

Exterior
Erod Customs & Capone Airbrush Designs
Custom one-piece front end
Custom fiberglass doors
Custom fiberglass trunk lid

Interior
Jamie Chassis rollcage
Grant steering wheel
RJ Racecars custom shift mechanism

Owner Specs
Private

Props
James Lin Motorsports for wiring and tuning, Golden Eagle Mfg., ATP Turbo, Jaime Chassis for the chassis build, EROD Custom Paints, Capone Designs Airbrush Studio (the best!), Robbie Miller Race Cars, T1 Performance, Alex Dieguez, Richie Rosado, Damon Chin, Jamie Jr. and Sr., Cole Dow, Jason Hall, Eddie Rodriquez, Alfred Lopez, and the others.

The Resume

Though he's owned a few Hondas along the way, Richardson's car history revolves mainly around some serious domestic muscle. The resume includes: 1966 Chevy Bel Air Station Wagon, 1970 Dodge Charger 440 6-Pack, 1968 Dodge Dart, 426 Hemi Implant, 1969 Dodge Satellite, 426 Hemi implant, 1978 Vega, 1983 Honda CRX Si, 1990 Honda Civic Si, 2001 Acura CL Type S, 2003 Acura CL Type-S six-speed.

CONNECT
CP Pistons
1902 Mc Gaw
Irvine
CA  92614
949-567-9000
http://www.cppistons.com
Injector Dynamics
214-607-9022
http://www.injectordynamics.com
Strange Engineering
8300 North Austin Avenue
Morton Grove
IL  60053
847-663-1701
http://www.strangeengineering.ne
t
By Rodrez
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
0 comments
Honda Tuning Magazine